DIY Insect Taxidermy for a Happy and Creepy Halloween

It’s fall, which means it’s time to start thinking about Halloween. Want to freshen up your Halloween holiday décor but finding spare hours hard to come by? This is the perfect DIY project – it’s fast, easy, and inexpensive. This DIY décor is actually pretty versatile; I’m thinking of using it year-round, not just for Halloween. Because who doesn’t love taxidermy, and who doesn’t love unexpectedly oversized, golden insects? (Hey, one out of two isn’t bad…)

DIY Insect TaxidermyView in gallery

DIY Insect Taxidermy for a Happy and Creepy HalloweenView in gallery

Let’s get started.

DIY Level: Beginner

DIY Insect Taxidermy - suppliesView in gallery

Materials Needed:

  • Large plastic insects
  • Unfinished wooden plaque(s)
  • Black sticky mounting dots, hot glue gun, and/or super glue
  • Gold spray paint
  • Flat (matte) black spray paint
  • 3M hanging strips

DIY Insect Taxidermy- prepare the bugsView in gallery

Lay out the insects with their bellies facing upward.

 

DIY Insect Taxidermy-shake your gold sprayView in gallery

Shake your gold spray paint to prepare for painting. (Tip: Use a paint + primer for best adhesion and coverage.)

DIY Insect Taxidermy- start srpayingView in gallery

With light, sweeping motions, spray paint the undersides of the bugs.

DIY Insect Taxidermy-play several coatsView in gallery

You’ll apply several coats, so don’t worry so much about getting an even coat of paint right off the bat. Focus on light coats.

DIY Insect Taxidermy - spray from different angleView in gallery

Reposition yourself and spray paint the bugs from different angles. These things are leggy, so you’ll want to hit the bugs from every angle to make sure they turn completely gold.

DIY Insect Taxidermy- flat black spray paintView in gallery

While the bugs are drying, shake your matte black spray paint to prepare it for spraying the mounting boards.

DIY Insect Taxidermy- spray paint the wood in blackView in gallery

(You can choose smaller plaques and mount the bugs individually if you want.) Paint, once again, in light, sweeping motions across the length of your plaques. For best results, follow the wood grain.

DIY Insect Taxidermy-apply more then one coat of flat blackView in gallery

As always while spray painting, don’t worry about full coverage with the first, or even second, coats. They will look weak and blotchy at first; that’s perfectly normal and fine. You’ll even everything out as you let each coat dry for a few minutes and hit it again with the next coat. Alternate spraying your wooden plaques and your golden bugs (flip these over so you can spray the tops), waiting 5-10 minutes between coats but no more than an hour between coats. Allow them to dry completely after the last coat.

DIY Insect Taxidermy- arrange your gold painted bugsView in gallery

Arrange your now-golden bugs on the plaques in the order and placement that you like best.

DIY Insect Taxidermy-sticky mounted dotsView in gallery

Place black sticky mounting dots (or hot glue or super glue, if that’s what you’ve chosen to use) on the parts of your bugs’ bodies that make contact with the mounting board. Also attach any legs or antennae that you want, for added support and also repositioning, in the case that your bugs came squashed and slightly askew.

DIY Insect Taxidermy- prepare to displayView in gallery

After the bugs are attached, you’re just about done!

DIY Insect Taxidermy for HalloweenView in gallery

Don’t you love these? They’re the perfect Halloween décor – creepy and fun, but still somewhat sophisticated. Somewhat.

DIY Insect Taxidermy- hangingView in gallery

Use 3M commandpicture hanging strips to hang your insect taxidermy boards on the wall, whether just for Halloween or for year-round enjoyment.

DIY Insect Taxidermy-hang your halloween artView in gallery

Hang up your boards with pride.

DIY Insect Taxidermy - a touch of glam for HalloweenView in gallery

The gold-on-black looks glamorous, but the content is perfectly whimsical. I just love the contrast of those two elements.

DIY Insect Taxidermy-flanking an artView in gallery

Use them flanking a mirror or artwork above a mantel, on a front entry table, or anywhere for a visual pick-me-up.

DIY Insect Taxidermy- insects are preaty bigView in gallery

These insects are 4”-6” long, which adds to the fun visual aspect of this DIY project.

DIY Insect Taxidermy- Angle ViewView in gallery

They’re big enough, in fact, that there is a distinct 3-D element. Just like any taxidermy project should have, really.

DIY Insect Taxidermy- decorate the staircase wallView in gallery

Happy Halloween! (Or whenever you want to highlight some bugs in your décor.)

gas-energy.com.ua

contact us

www.eurobud.com.ua